Flowgraph View - Kodak

Displaying Properties from Look Builder
Software Basics
From the Properties window, you can choose to display pixel information and
look information.
If you enable the Display pixel information, as you move the cursor around
the image, the pixel values are displayed on the bottom left of the Look Builder
window.
(x:y)—coordinates for the cursor
RGB—red, green and blue values as measured before the monitor
characterization profile is applied to the image.
rgb—red, green and blue values as measured after the monitor
characterization profile is applied to the image and the color is converted to
display color space.
To set the properties display:
1. In Look Builder, right-click (WINDOWS OS) or Control + Click
(MACINTOSH OS) the image and click Properties.
The following window opens.
2. Select Display pixel information.
3. Set the (Average) Avg. Radius that you want to use when calculating the
average of multiple pixel values.
4. Select Display look summary to display the look summary on the
lower- left corner of the image in Look Builder.
5. Click OK.
KODAK Look Manager System User Guide V2.2 31