Flowgraph View - Kodak

Input/Output Nodes in Flowgraph View
2. Select the Aspect Ratio from the drop-down menu, or click and drag to
draw a crop box.
3. To move the crop box, click the center circle and drag the box.
4. Click Color to select a color for the area that will be cropped out of the
image.
5. Use the Opacity slider bar to select an opacity value for the masked area.
NOTE
The Color and Opacity options are for reference in this window only and
do not affect the final image.
6. Click OK.
Changing Images in Your Flowgraph Recipe
After you have created a look for an image in your recipe, you may want to
view the look on other images from the same scene.
To change images in your recipe:
1. Double-click the Input Roll/Image node.
2. On the Image Controller tab, click a single image in the lower display
area. If necessary, drag the image from the top display area into the lower
display area.
This is now the image that you will be working with in the recipe.
Selected images have a blue outline around them. If more than one image is
selected, the last image selected is the image that appears in your recipe.
KODAK Look Manager System User Guide V2.2 131