Flowgraph View - Kodak

Printing Still Images
Determining Your Printer Offsets
You can establish printer offset values that are specific to your printer using
the Q60 chart that came with the Look Manager System.
You only need to perform this procedure once, but you may change it, if
necessary. The values that you enter into the Adjust Printer Offsets window
remain there until you change them.
NOTE
Keep in mind that a print viewed under daylight will look different when viewed
under fluorescent light.
To determine your printer offsets in Main View:
1. Print the image q60_Printer_Reference.kdx. The image is located at:
(WINDOWS OS): C:\Program Files\Kodak\KODAK Look Manager
System\Images
(MACINTOSH OS): Applications/KODAK Look Manager System/Images
2. Compare your printed Q60 chart to the Q60 chart displayed on your
calibrated monitor.
3. If the color match is not suitable, display the test image again in Look
Builder.
4. Click the Print icon.
5. Type new values or use the slider bars.
6. Click OK.
7. Print the image again and compare it to the image on the calibrated
monitor.
8. Repeat steps 1-7 until the match is satisfactory.
To determine your printer offsets in Flowgraph View:
1. Print the image q60_Printer_Reference.kdx. The image is located at:
(WINDOWS OS): C:\Program Files\Kodak\KODAK Look Manager
System/Images
(MACINTOSH OS): Applications/KODAK Look Manager System\Images
2. Compare your printed Q60 chart to the Q60 chart displayed on your
calibrated monitor.
3. If the color match is not suitable, display the test image again in an
ImageViewer.
4. Right-click (WINDOWS OS) or Control + Click (MACINTOSH OS) in the
ImageViewer to display the options menu.
224 KODAK Look Manager System User Guide V2.2