E7505 Master-LS2 (MS-9121 v1.X) - Premio, Inc.
E7505 Master-LS2 (MS-9121 v1.X) - Premio, Inc.
E7505 Master-LS2 (MS-9121 v1.X) - Premio, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BIOS Setup<br />
Off Leaves the computer in the power off state.<br />
On Reboots the computer.<br />
Former-Sts Restores the system to the status before power failure or<br />
interrupt occurs.<br />
OnChip IDE Device<br />
Press to enter the sub-menu and the following screen appears:<br />
IDE HDD Block Mode<br />
This allows your hard disk controller to use the fast block mode to transfer<br />
data to and from the hard disk drive. Block mode is also called block<br />
transfer, multiple commands or multiple sector read/write. Enabled enables<br />
IDE controller to use block mode; Disabled allows the controller to<br />
use standard mode.<br />
On-Chip Primary/Secondary PCI IDE<br />
The integrated peripheral controller contains an IDE interface with support<br />
for two IDE channels. Choose Enabled to activate each channel<br />
separately.<br />
IDE Primary/Secondary <strong>Master</strong>/Slave PIO<br />
The four items allow you to set a PIO (Programmed Input/Output) mode<br />
for each of the four IDE devices that the onboard IDE interface supports.<br />
Modes 0~4 provide increased performance. In Auto mode, BIOS automatically<br />
determines the best mode for each IDE device.<br />
IDE Primary/Secondary <strong>Master</strong>/Slave UDMA<br />
Ultra DMA implementation is possible only if your IDE device supports<br />
3-17