E7505 Master-LS2 (MS-9121 v1.X) - Premio, Inc.
E7505 Master-LS2 (MS-9121 v1.X) - Premio, Inc.
E7505 Master-LS2 (MS-9121 v1.X) - Premio, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BIOS Setup<br />
ters the suspend/sleep mode, but if the button is<br />
pressed for more than four seconds, the computer is<br />
turned off.<br />
Wake Up by PCI Card, Power On by Ring<br />
These settings specify whether the system will be awakened from power saving<br />
modes when activity or input signal of the specified hardware peripheral<br />
or component is detected. Setting options: Enabled, Disabled.<br />
<strong>MS</strong>I Reminds You...<br />
You need to install a modem card supporting power on function<br />
for “Power On by Ring” function.<br />
Resume By Alarm<br />
The field is used to enable or disable the feature of booting up the system on<br />
a scheduled time/date.<br />
Date (of Month) Alarm<br />
The field specifies the date for Resume by Alarm. Settings: 0~31.<br />
Time (hh:mm:ss) Alarm<br />
The field specifies the time for Resume by Alarm. Format is <br />
.<br />
<strong>MS</strong>I Reminds You...<br />
If you have changed this setting, you must let the system boot up<br />
until it enters the operating system, before this function will work.<br />
Reload Global Timer Events: Primary IDE 0/1, Secondary IDE 0/1, FDD/<br />
COM/LPT Port, PCI PIRQ [A-D]#<br />
Global Timer Events are I/O events whose occurrence can prevent the system<br />
from entering a power saving mode or can awaken the system from such a<br />
mode. In effect, the system remains alert for anything which occurs to a device<br />
that is configured as Enabled, even when the system is in a power down<br />
mode.<br />
3-21
Change language