13.08.2013 Views

The Chemistry of Powder and Explosives - Sciencemadness Dot Org

The Chemistry of Powder and Explosives - Sciencemadness Dot Org

The Chemistry of Powder and Explosives - Sciencemadness Dot Org

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

100 PYROTECHNICS<br />

Bombshells<br />

Bombshells are shot from mortars by means <strong>of</strong> a charge <strong>of</strong><br />

black powder <strong>and</strong> burst high in the air with the production <strong>of</strong><br />

reports, flashes, showers, <strong>and</strong> other spectacular effects. <strong>The</strong><br />

smaller ones are shot from paper mortars; the larger, most commonly<br />

from mortars <strong>of</strong> iron. In the past they have <strong>of</strong>ten been<br />

made in a spherical shape, wood or paper or metal hemispheres<br />

pasted heavily over with paper, but now in this country they<br />

are made almost exclusively in the form <strong>of</strong> cylinders. For the<br />

same caliber, cylindrical bombshells will hold more stars or<br />

other display material than spherical ones, <strong>and</strong> it is much easier<br />

to contrive them in a manner to procure multiple bursts. <strong>The</strong><br />

materials <strong>of</strong> construction are paper, paste, <strong>and</strong> string. <strong>The</strong> shells<br />

are supplied with Roman fuses timed to cause them to burst at<br />

the top <strong>of</strong> their flight. <strong>The</strong> success <strong>and</strong> safety <strong>of</strong> bombshells depend<br />

upon carefully constructed fuses.<br />

Roman fuses are made by pounding the fuse powder as firmly<br />

as is possible into hard, strong, tightly rolled paper tubes. <strong>The</strong>se<br />

are commonly made from Bird's hardware paper, pasted all over<br />

before it is rolled, <strong>and</strong> arc dried carefully <strong>and</strong> thoroughly before<br />

they are loaded with ramrod <strong>and</strong> mallet. "When a number <strong>of</strong><br />

these cases are rolled," says Weingart, 47 "they must be dried in<br />

the shade until they are as hard as wood <strong>and</strong> rattle when struck<br />

together." He recommends the first <strong>of</strong> the following-listed compositions,<br />

the Vergnauds the others: 48<br />

Potassium nitrate 2 4 2<br />

Sulfur 1 2 1<br />

Meal powder 4 6 3<br />

Antimony sulfide 1<br />

<strong>The</strong> length <strong>of</strong> the column <strong>of</strong> composition determines the duration<br />

<strong>of</strong> the burning. <strong>The</strong> composition in the fuse must be as hard <strong>and</strong><br />

as firmly packed as possible; otherwise it will blow through into<br />

the shell when in use <strong>and</strong> will cause a premature explosion.<br />

Some manufacturers load the tubes <strong>and</strong> cut them afterwards with<br />

a fine-tooth hack saw. Others prefer to cut them to the desired<br />

lengths with a sharp knife while they are prevented from collapsing<br />

by a brass rod through them, <strong>and</strong> afterwards to load<br />

47 Ibid., p. 130.<br />

48 A. D. <strong>and</strong> P. Vergnaud, "Nouveau manuel complet de Partificier.<br />

Pyrotechnie civile." (Ed., G. Petit) (Manuels Roret), Paris, 1906.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!