13.08.2013 Views

The Chemistry of Powder and Explosives - Sciencemadness Dot Org

The Chemistry of Powder and Explosives - Sciencemadness Dot Org

The Chemistry of Powder and Explosives - Sciencemadness Dot Org

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

284 NITRIC ESTERS<br />

At a time when the only practicable methods for the preparation<br />

<strong>of</strong> nitromethane were the interaction <strong>of</strong> methyl iodide with silver<br />

nitrite <strong>and</strong> the Kolbe reaction from chloracetic acid, the explosive<br />

was far too expensive to merit consideration. <strong>The</strong> present cheap<br />

<strong>and</strong> large scale production <strong>of</strong> nitromethane by the vapor-phase<br />

nitration <strong>of</strong> methane <strong>and</strong> <strong>of</strong> ethane has altered the situation pr<strong>of</strong>oundly.<br />

Trimethylolnitromethane trinitrate is an explosive which<br />

can now be produced from coke, air, <strong>and</strong> natural gas. Nitromethane<br />

too has other interest for the manufacturer <strong>of</strong> explosives.<br />

It may be used as a component <strong>of</strong> liquid explosives, <strong>and</strong> it<br />

yields on reduction methylamine which is needed for the preparation<br />

<strong>of</strong> tetryl.<br />

<strong>The</strong> crude trimethylolnitromethane from the condensation commonly<br />

contains a small amount <strong>of</strong> mono- <strong>and</strong> dimethylolnitromethane<br />

from reactions involving one <strong>and</strong> two molecules <strong>of</strong><br />

formaldehyde respectively. It is recrystallized from water to a<br />

melting point <strong>of</strong> 150°, <strong>and</strong> is then nitrated. Stettbacher reports<br />

that the pure substance after many recrystallizations melts at<br />

164-165°. <strong>The</strong> nitration is carried out either with the same mixed<br />

acid as is used for the nitration <strong>of</strong> glycerin (40% nitric acid,<br />

60% sulfuric acid) or with very strong nitric acid, specific<br />

gravity 1.52. If the trihydric alcohol has been purified before<br />

nitration, there is but little tendency for the nitrate to form<br />

emulsions during the washing, <strong>and</strong> the operation is carried out<br />

in the same way as with nitroglycerin. In the laboratory preparation,<br />

the nitric ester is taken up in ether, neutralized with<br />

ammonium carbonate, dried with anhydrous sodium sulfate, <strong>and</strong><br />

freed from solvent in a vacuum desiccator.<br />

<strong>The</strong> explosive is procured as a yellow oil, more viscous than<br />

nitroglycerin, density 1.68 at ordinary temperature. It has but<br />

little tendency to crystallize at low temperatures. A freezing<br />

point <strong>of</strong> —35° has been reported. It is very readily soluble in<br />

ether <strong>and</strong> in acetone, readily soluble in alcohol, in benzene, <strong>and</strong><br />

in chlor<strong>of</strong>orm, <strong>and</strong> insoluble in ligroin. It is less soluble in water<br />

<strong>and</strong> less volatile than nitroglycerin. Because it is less volatile, it<br />

is slower to cause headaches, <strong>and</strong> for the same reason the headaches<br />

are slower to go away. It is distinctly inferior to nitroglycerin<br />

as a gelatinizing agent for collodion nitrocotton. <strong>The</strong><br />

nitro group attached directly to an aliphatic carbon atom appears<br />

to have an unfavorable effect on stability, for trimethylol-

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!