UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
COOKING <strong>UPDATE</strong>S<br />
WARMING DRAWER FEATURE<br />
Complaint - Control Indicates Warming Drawer Feature Is Not Available (scrolls<br />
across the screen “FEATURE NOT AVAILABLE”)<br />
For <strong>Whirlpool</strong> Ranges built since August of 2008 (WFE and WFG models) there are a<br />
few items that may cause the control to indicate that the warming drawer function is<br />
not available (listed in order of most probable first).<br />
1. The unit is in the self clean mode with the door locked. If the oven door is locked<br />
then the ERC control will not allow the warming drawer to be used.<br />
2. If there are fault codes related to the warming drawer then the warming drawer will<br />
not function. The fault codes can be checked in diagnostic mode.<br />
3. The warming drawer sensor is disconnected, either at the control (P10 connector<br />
pins 3 and 4) or at the in-line connector near the sensor. The warming drawer<br />
sensor can be tested in diagnostic mode to verify that it is reading correctly.<br />
5