UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SMALL GAP BETWEEN UI AND FC DOOR<br />
Small Gap between door skin and<br />
Dispenser User Interface. See figure 1<br />
This is usually caused by the UI being<br />
bowed in and not the door skin. Sometimes<br />
bowing occurs over time from use.<br />
Remove the skin, and shim the backside<br />
of this Disp. UI out to close the gap. A<br />
service part is in the works. See figures 2<br />
and 3. Contact Tech line if part is needed.<br />
A service Pointer will be issued.<br />
Figure 2<br />
57<br />
Figure 1<br />
Figure 3