UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
•<br />
•<br />
•<br />
•<br />
Removing Door Skin Replacing<br />
Handle<br />
Remove hinge side screws,<br />
top screws, and bottom screws.<br />
See figure 1<br />
Figure 1<br />
Pull the spacers from all sides but<br />
handle side (it is 2-sided taped in)<br />
then pull skin off door. See figures 2<br />
and 3.<br />
Remove screws from backer plate to<br />
remove door handle. See figure 4.<br />
For FC skin, there are 2 screws holding<br />
skin to top of Dispenser housing<br />
and 2 screws holding skin to dispenser<br />
housing underneath the drip tray. It<br />
is recommended to remove the door<br />
to remove the skin<br />
REMOVING DOOR SKIN<br />
56<br />
Figure 2<br />
Figure 3<br />
Figure 4