UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
UD-35 SERVICE UPDATE FIRST HALF—2009 - Whirlpool
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DOORS OUT OF PLANE –SxS<br />
Condition: Doors are sealing but one door sticks out away from the cab more than<br />
the other by more than 1/4” (1/4” or less is normal but can be adjusted out.) In most<br />
cases there is an apparent difference in the compression of the gaskets on the hinge<br />
and handle side.<br />
•<br />
•<br />
Service Fix: SxS<br />
- Applying permagum under corner of compressed gasket will work in most<br />
cases.<br />
-Heat gasket w/ heat gun or hair dryer, stretching gasket while applying heat,<br />
then apply ice cube to gasket so that it takes new stretched set.<br />
-If loss of door seal, move top hinges in and out by loosening tap plate screws,<br />
not hinge screws. See figure 1<br />
Gasket may be too compressed on hinge side, moving top hinge in has re<br />
verse affect on handle side and pulling hinge out may move handle side in.<br />
50