English - StellarSupport - John Deere

Managing User Access—Theory of Operation
Access Manager is used to manage user access to almost
any function on the display. Functions can be locked for
the operator to simplify the user experience and reduce
accidental settings changes. Once functions are locked for
“Operator Mode”, a password is required to enter “Owner
Mode” and access those functions. The current password
can be retrieved using Message Center. It is stored in
Diagnostic Address 62. See the Troubleshooting and
Diagnostics section for how to view Diagnostic Addresses.
Managing User Access
25-1
Dual Display Operation
The GS3 2630 display maybe installed on the corner
post of a John Deere vehicle that also has a display on
the armrest running Access Manager. In this case, the
Access Manager settings and Mode are NOT transferred
automatically between the displays and must be set on
each display individually.
CZ76372,0000167 -19-16SEP10-1/1
112912
PN=22