English - StellarSupport - John Deere

Machine Tab
A—Machine Tab
B—Implement 1 Tab
C—Implement 2 Tab
D—Machine Type Drop-Down
Menu
E—Machine Model Drop-Down
Menu
F— Machine Name Drop-Down
Menu
G—Connection Type Drop-Down
Menu
H—Machine Turn Radius
Input-Box
I— Turning Sensitivity Input-Box
NOTE: All items and changes will be saved under
the current machine name.
NOTE: Offsets are provided by some ISO implements and
some Deere tractors. Some list boxes may be grayed
out when the machine is automatically recognized.
The Machine and Implement tabs are required to be
populated with equipment information such as:
• Type
• Model
• Name
• Offsets
Machine Type—Vehicle type being used (e.g. Tractor,
Combine, Sprayer).
GreenStar General
Machine Tab
45-6
J— Change Offsets Button N—Fuel Button (Business
K—Recording Source Drop-Down Pack/Europe Only)
Menu
L— Record/Pause Button
M—COM Port Button
Machine Model—Model number of the vehicle being
used. For John Deere vehicles, model numbers will be
available from the drop down list.
Machine Name—The name is used to further clarify
which machine is being used. For instance, if there are
two 8430’s in your operation, the machine names may be
“John” and “Deere”, or “8430-1” and “8430-2”, or simply
“1” and “2”. However, settings pertaining to the tractor
such as turning radius, turn sensitivity, dimensions, etc.
are stored to the name.
Continued on next page CZ76372,000013B -19-14JUN11-2/4
PC13268 —UN—28APR11
112912
PN=44