English - StellarSupport - John Deere

Managing Activations
The buttons and functions corresponding to each
GreenStar Pro Module activation may be shown or hidden
by checking the ON / OFF checkbox for each activation.
The box must be checked to use the corresponding Pro
Module. By turning OFF activations that are not being
used, the corresponding buttons and functions will be
hidden, making the display simpler to navigate.
Demo Activations are available to try out each Pro Module
for 15 hours of use. The AutoTrac Demo is turned on
by default. To try another Demo, such as John Deere
Section Control, turn it on and the Section Control buttons
and functions will show up on the display if an implement
controller capable of that Pro Module is connected.
Go to GreenStar Main >> Settings >> Activations
IMPORTANT: Turning a Demo Activation OFF will
not stop the activation time from counting
down if the corresponding function has
been setup and started. It will simply hide
the corresponding buttons.
Display Setup
35-2
GreenStar - Activations
PC12929 —UN—29SEP10
BA31779,00002CF -19-15NOV11-1/1
112912
PN=26