English - StellarSupport - John Deere

Setup Wizard
The Setup Tab is intended to simplify initial setup and
configuration of the GS3 applications while also helping
the operator become familiar with where the setup and
configuration settings are located and which settings are
required for full functionality. After using the Advanced
Setup feature, the operator can start and run their desired
operation and also know where to go to change settings.
The Advanced Setup feature can also be used to change
individual settings as the operator progresses through
their day-to-day operations.
While using Advanced Setup, select which functionality
to configure.
• Resources
• Machine
• Implement
• Documentation
• Guidance
• Boundaries
• iTEC Pro
• John Deere Section Control
• Implement Guidance
Select any combination of functions to configure. If a
function is dependent on other functions, the system
automatically selects the required functions. The operator
is not able to deselect those functions. If the operator
selected the Boundaries function, the Resources function
would be automatically selected to force the operator to
select a Client, Farm, and Field.
The functions that the operator selects determine which
pages are included in Advanced Setup. Only screens
associated with functions selected are included.
For each function, there is a list of required fields that
must be complete and valid before the system works.
Red asterisks indicate required fields. Based on the
functions the operator has selected for setup, the GS3
applications determine which fields are required for
GreenStar General
45-2
GreenStar 3 Pro - Main
GreenStar 3 Pro - Main
successful setup. Those fields are visually indicated to the
operator. Progressing through Advanced Setup without
completing the required fields causes the system not to
function correctly.
PC12738 —UN—25AUG10
PC12739 —UN—25AUG10
BA31779,00002D0 -19-15NOV11-1/1
112912
PN=40