English - StellarSupport - John Deere

Display Secondary Navigation
Secondary display controls consist of five buttons located
on backside of display. They provide backup navigation
in the event that the primary display controls are not
communicating with display.
ENTER button (A) and CANCEL button (D) operate the
same as they do on the primary display controls.
Up Arrow (B) and Down Arrow (C) simulate thumb wheel
operation on display control.
DISPLAY RESET button (E) resets display without cycling
power on vehicle. Hold for 3 seconds to reboot.
A—Enter
B—Up arrow
C—Down arrow
Display Control
D—Cancel
E—Display reset
CAUTION: Do not mount display control on
the side of dual displays (2630 and Original
GreenStar Dispaly). This blocks the operator’s
view and overloads the bracket. Mount the
display control elsewhere.
The display control is the secondary navigational point
on the GreenStar Display.
The display control contains 10 available short-cut
softkeys A-J, Thumb Wheel (A), ENTER button (B),
CANCEL button (C), and MENU button (D).
A—Thumb Wheel
B—ENTER button
C—CANCEL button
D—MENU button
Display Navigation
30-2
Display Secondary Navigation
Display Control
PC8580 —UN—17AUG05
OUO6050,000229E -19-20NOV06-1/1
PC8864 —UN—09JAN06
CZ76372,000012E -19-13AUG10-1/1
112912
PN=24