Intel(R) Matrix Storage Manager User's Manual - Fujitsu UK
Intel(R) Matrix Storage Manager User's Manual - Fujitsu UK
Intel(R) Matrix Storage Manager User's Manual - Fujitsu UK
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Troubleshooting<br />
3. Power on the system. During the system startup, the <strong>Intel</strong> <strong>Matrix</strong> <strong>Storage</strong> option ROM<br />
user interface will display the RAID 10 volume status as ‘Rebuild’.<br />
4. After the operating system is running, select <strong>Intel</strong> <strong>Matrix</strong> <strong>Storage</strong> Console from the<br />
Start menu or click the <strong>Intel</strong> <strong>Matrix</strong> <strong>Storage</strong> <strong>Manager</strong> tray icon.<br />
5. From the View menu, select ‘Advanced Mode’ to display a detailed view of the <strong>Intel</strong><br />
<strong>Matrix</strong> <strong>Storage</strong> Console.<br />
6. From the Volumes view in the device pane, select the volume and view the information<br />
pane. The status shows as ‘<br />
7. Rebuilding: % complete’. After the rebuild is complete, the status shows as ‘Normal’.<br />
21.1.7 Failed RAID 10 Volume<br />
A RAID 10 volume is reported as ‘Failed’ when at least two members have failed. If this occurs,<br />
please follow the procedure shown below:<br />
Failed Members<br />
1. Make sure the system is powered off.<br />
2. Replace the failed hard drives with new hard drives that are of equal or greater<br />
capacity.<br />
3. Power on the system. During the system startup, the <strong>Intel</strong> <strong>Matrix</strong> <strong>Storage</strong> <strong>Manager</strong><br />
option ROM user interface will display the RAID 10 volume status as ‘Failed’,<br />
prompting you to press Ctrl-I to enter the user interface.<br />
4. Press Ctrl-I to enter the ‘MAIN MENU’.<br />
5. Select option 2 in the main menu to ‘Delete RAID Volume’.<br />
6. In the ‘DELETE VOLUME MENU’, select the failed RAID 10 volume, using the up<br />
and down arrow keys.<br />
7. Press the ‘Delete’ key to delete the volume.<br />
8. Press ‘Y’ to confirm the deletion.<br />
9. Create a new RAID 10 volume.<br />
10. You will also need to reinstall the operating system on the new volume.<br />
21.2 Volume Modification Failed Error Dialog<br />
To migrate a 2 or 3-drive RAID 0 array or a 2-drive RAID 1 array to RAID 5, the hard drive(s)<br />
added to the system must be equal to or greater in size than the hard drive members of the RAID 0<br />
or RAID 1 array.<br />
If you receive the following dialog after clicking ‘Finish’ in the Modify Volume wizard, check<br />
the size of the hard drive(s) that were added to the system:<br />
90 <strong>User's</strong> <strong>Manual</strong><br />
R
Change language