Intel(R) Matrix Storage Manager User's Manual - Fujitsu UK

R
21.3 Larger Source Hard Drive Error
Troubleshooting
To migrate from a RAID Ready configuration to a RAID configuration, the member hard drives
must be equal to or greater in size than the source hard drive. If the source hard drive is larger, the
following error dialog will appear and the migration process will not begin:
If the above dialog appears, follow the steps listed in the dialog to correct the problem.
21.4 Hard Drive has System Files Error
If the computer boots from a Serial ATA hard drive, that hard drive cannot be selected as a
member hard drive during the manual ‘Create RAID Volume’ process. If it is chosen, the
following error dialog will appear and the hard drive must be unselected and a new hard drive(s)
chosen.
User's Manual 91