AUTO-CUT 300 - Victor Technologies
AUTO-CUT 300 - Victor Technologies
AUTO-CUT 300 - Victor Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7.02 O-Ring Lubrication<br />
Lubricate all three O-Rings on the Cartridge Assembly and all three O-Rings on the Torch Head periodically<br />
with O-Ring Lubricant supplied. Remove the snap ring on the cartridge assembly and slide the locking ring<br />
downward for access to the O-Ring under the locking ring.<br />
Inner O-Ring (Cat. No. 9-3030)<br />
Location (Under Locking Ring)<br />
Snap Ring<br />
7.03 Parts Wear<br />
O-Ring, Cat. No. 9-3029<br />
O-Ring, Cat. No. 9-3028<br />
Cartridge Assembly<br />
Art # A-04071_AC<br />
Replace the Gas Distributor if it is charred or cracked.<br />
CAUTION<br />
Replace the Gas Distributor if the flange is damaged in any way.<br />
Replace the tip and/or electrode if they are worn.<br />
Good Tip Worn Tip<br />
O-Rings<br />
Cat. No. 9-9041<br />
Cat. No. 9-3027<br />
Cat. No. 9-3026<br />
Cat. No. 9-3025<br />
Torch Head<br />
Art # A-04066_AC<br />
Good Electrode Worn Electrode<br />
Art # A-04861<br />
TORCH MAINTENANCE 7-2 Manual 0-4817 Auto-Cut <strong>300</strong>