AUTO-CUT 300 - Victor Technologies
AUTO-CUT 300 - Victor Technologies
AUTO-CUT 300 - Victor Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
E. Install Plasma and Shield Gas Leads<br />
1. Remove the gas box/arc starter cover from the power supply.<br />
2. Connect Shield and Plasma gas leads to gas box on power supply. Shield gas and plasma gas connections are<br />
left- and right- hand threaded and will not interchange. The leads are identical with one each of these fiitings<br />
so you will need to use oposite ends to make these connections.<br />
3. Replace the cover.<br />
4. Locate the two brass adapters and attach them to the two 4' long Plasma and Shield gas hoses that go to the<br />
torch.<br />
Manual 0-4817 Auto-Cut <strong>300</strong> A-18 APPENDIX
Change language