NeuLAND - FAIR

9. Infrastructure
Two identical detector frames are foreseen for NeuLAND, allowing to split the detector
for experimental reasons or for maintance purposes, see section 5.3 for details. Both
detector frams shall be located in the experimental hall (Cave C and later R 3 B hall).
Within the experimental hall the full-equipped detector is moved using air cushions. A
certain planarity of the floor is thus demanded within the hall.
The weight of one double-plane of NeuLAND amounts to about 1 ton. The doubleplanes
can be moved from one to the other frames utilizing the guide rails. In case, they
have to be taken out completely from the frame, this easily can be performed using the
crane installed in the experimental hall, which is laid out to carry up to 10 tons.
The power consumption, and thus the heat dissipation, for full NeuLAND amounts
to about 40 kW. This takes into account 4 W per photomultiplier and about 1.5 W
per Tacquila read-out channel. In addition about two racks of ancillary electronics are
required and taken into account. Air cooling will be used.
87