Conference, Proceedings

for a new building have to be greater than 3 m 2 .K.W ‐1 . In each case of measured PORFIX
materials in dry state the R values are high enough that extra insulation material becomes
superfluous and the overall insulation level for our climate is easily achieved. This means that
there it is no need of extra insulation for masonry walls build up from this kind of bricks.
References
[1] KUBIČÁR, Ľ. (1990): Pulse method of measuring basic thermophysical parameters.
Comprehensive Analytical Chemistry, ed. G. Svehla, Elsevier, Amsterdam, Tokyo,
Oxford, New York
[2] KUBIČÁR Ľ., BOHÁČ V., (1999): Review of several dynamic methods of measuring
thermophysical parameters. in “Proc. of 24th Int. Conf. on Thermal Conductivity / 12th Int.
Thermal Expansion Symposium”, ed. P.S. Gaal, D.E. Apostolescu, Lancaster: Technomic
Publishing Company, pp. 135–149.
[3] GUSTAFSSON S.E. 1991. Rev. Sci. Instrum. 62:797‐804
[4] SABUGA W., HAMMERSCHMIDT U. International Journal of Thermophysics, 1995, 16 (2):
557‐565
[5] KREMPASKÝ J. Meranie termofyzikálnych veličín. Vyd. SAV, Bratislava, 1969, 1‐288.
[6] BOHÁČ V., KUBIČÁR Ľ., VRETENÁR V., HIGH TEMP‐HIGH PRESS. 2003/2004, Vol.
35/36, pp. 67‐74
[7] BOHÁČ V. et all. Methodology of parameter estimation of pulse transient method and the
use of PMMA as standard reference material. Proc. of TEMPMEKO 2004, 22 ‐ 25 June 2004
Dubrovník, Croatia
[8] BOHÁČ V., VRETENÁR V., KUBIČÁR Ľ. Optimization methodology for the pulse
transient method and its application at the measurement of thermophysical properties of
materials, Proc. of the Thermophysics 2007. Kočovce, October 12 – 13, 2005, Editors: Peter
Matiašovský, Oľga Koronthályová, Issued by Institute of Construction and Architecture,
Slovak Academy of Sciences in Bratislava, First Edition Released in 2005, ISBN 80‐969434‐
2‐1 EAN 9788096943425
[9] BOHÁČ V., DIEŠKA P., AND KUBIČÁR Ľ. The progress in Development of new models
for pulse transient method. Proc. of Thermophysics 2007. Editor: Jozef Leja, Vydavateľstvo
STU, Bratislava 2007, ISBN 978‐80‐227‐2746‐4
[10] BOHÁČ V., KUBIČÁR Ľ., VRETENÁR V. Methodology of the testing of model for contact
pulse transient method and influence of the disturbance effects on evaluating
thermophysical parameters of the PMMA, Measurement Science Review, Volume 5, Section
3, 2005, pp.98‐103
[11] DIEŠKOVÁ M., DIEŠKA P., BOHÁČ V., KUBIČÁR Ľ. Determination of temperature field
and an analysis of influence of certain factors on a temperature fields. In collection of
manuscripts of the 17th ECTP, 2005, Bratislava, Slovakia. Vozár L., Medveď I. and
Kubičár Ľ. editors. (CD‐ROM).
[12] BOHÁČ V., DIEŠKA P., AND KUBIČÁR Ľ. The heat loss effect at the measurements by
transient pulse method, Measurement Science Review, Vol. 7, Sect. 3, No.1, 2007, pp.24-28
19