WYNN User's Guide (PDF)

Teacher Exercise Guide
106
Important: Always use the blue Scan button – – when
scanning with WYNN. The Scan button appears on the
blue File Management toolbar. If there is a Scan button
located on your scanner, do not use this button to Scan
documents into WYNN, even if instructed to do so in your
scanner’s manual.
If your scanner has a Scan button, never use it when
scanning with WYNN.
Note: Some scanners use the back of the scanner glass for page
placement for the top of the page. Others use the front of
the scanner glass. Each scanner has an arrow or some
other mark to show you where the top of the page should
be; make sure you are familiar with your scanner’s
orientation.
Color Scanning
WYNN scans in color by default; however, color scanning takes
longer than black and white scanning.
To enable black and white scanning:
• From the Scan menu, click the Color Scanning command.
The checkmark no longer appears next to the command.
All future scans use the black and white mode until you
change this setting.
To re-enable color scanning:
• From the Scan menu, click the Color Scanning command.
A checkmark no longer appears next to the command.