WYNN User's Guide (PDF)

Teacher Exercise Guide
With Express Batch Scanning enabled, as soon as the
scanner head returns to its starting position, it starts
scanning again. To set an additional delay, from the
Express Batch Delay list box, select a value from 1 to 25
seconds as the delay that occurs between scanned
pages. Otherwise, as soon as the scanner head returns
to its starting position, it starts scanning again.
2. From the Scanning Mode list box, select Express
Batch.
3. Click OK.
WYNN is now configured for express batch scanning
mode.
Note: Any changes made in your Scanning Settings property page
are automatically saved upon exit.
To Scan in Express Batch Mode:
Note: If you are using an HP ScanJet 5500 series scanner, make
the following adjustments in WYNN before scanning.
Otherwise, you may experience problems when scanning
in Express Batch mode.
From the Advanced menu, select the Scanner Selection
command.
In the Scanner Selection dialog, select the HP ScanJet
5500C as your scanner, choose the three TWAIN
Properties settings, and then click OK.
During scanning, you must watch and listen for when the scanner
head reaches the bottom of the glass and returns to the top. In
those few seconds, you must turn the page.
111