WYNN User's Guide (PDF)

Network WYNN Installation
34
Adding the Environment Variable
LSFORCEHOST
Tip: It is recommended that you add the environment variable
LSFORCEHOST to the client computers and set it to the
name or IP address of the SentinelLM license server.
When the Freedom Scientific program starts, it will only
search for a product license on the specified computer. If
you have distributed the license over more than one
license server and you want the program to search for the
first available token, do not add this environment variable.
For more information, refer to the System Administrator’s
Guide, which is a Network Authorization tool that you
installed earlier.
Do the following to add the environment variable:
1. From Windows Explorer, select My Computer. Next, rightclick
My Computer and choose Properties.
2. In the System Properties dialog box, select the Advance
tab, and choose the Environment Variables button.
3. Select the New button that appears in the System
Variables area, and then enter LSFORCEHOST in the
Variable name field and the server name or IP address in
the Variable Value field. Click OK to close the dialog box
and save the changes.
WYNN Client Installation Process
WYNN installation is a two-step process.
• The first step is to install the WYNN application by running
the Setup.exe file on the client from the WYNN server.
• Once the application is installed, determine if you want to
install the speech synthesizer. If you do, insert a speech
synthesizer CD. Install as many of the voices as you like.