WYNN User's Guide (PDF)

WYNN Single-User and Non-Network Multi-User Installation
12
• Uninstall any previous version of WYNN (see Uninstalling
Previous WYNN Software)
WYNN Installation Process
WYNN installation is a four-step process.
• First, you must insert the WYNN Authorization CD and copy
the Authorization number to your computer (single-user
program only).
• The next step is to install the WYNN application using the
WYNN program CD.
• Once the application is installed, remove the WYNN program
CD, and insert the speech synthesizer CD. Install as many of
the voices as you like.
• Finally, open the WYNN application and activate the
program. Activation is a one-time task that enables and
registers your single-user or NNMU software with Freedom
Scientific. You must activate the application before you can
use WYNN.
Copying the WYNN Authorization Number
The Authorization CD contains a 20-digit alphanumeric number
that you must transfer to your computer. The Authorization number
is part of the Internet License Manager (ILM) activation process.
You must activate your WYNN application before it can be used.
Important: The WYNN NNMU program does not use an
Authorization CD. Instead, its Authorization numbers are
printed on a label sheet. Assign one label to each computer
that will use the WYNN program, and enter that number
into the Authorization number field when prompted. Refer
to Activating WYNN for more information.