Sanyo-DP42545 (English) - Specs and reviews at HDTV Review

ANALOG A/V CONNECTIONS
USE THE VIDEO1 JACKS TO CONNECT A VCR OR OTHER ANALOG DEVICE
Switch off TV and external equipment before connecting
cables. (Cables are not supplied.) Follow these steps to
easily connect your VCR.
1
Connect
NOTE:
VCR’s Audio / Video Out to the TV’s Video1 In
Jacks.
For Mono VCR (single audio jack) connect VCR’s Audio
Out to TV’s Audio (L) Input.
Optional
2
Connect VCR’s S-Video Out to the TV’s S-Video In Jack.
NOTE: S-Video jack connection overrides a Video jack connection.
■
■
Press the INPUT key after connecting cables to
access the Video1 Input. There is NO need to tune
to a blank channel.
Any compatible analog video device can be connected
to these jacks.
3
Press
the POWER key to turn on the TV, turn on
external equipment.
Remote Control
4
Press
the INPUT key to select Video1 to view the
VCR program.
NOTE: “No Signal” will appear on the screen for five seconds
when no signal is detected at the Video1 input.
4
INPUT
POWER
1 2 3
4 5 6
7
8 9
INFO
SLEEP
3
Back View
of VCR
IN
OUT
R-AUDIO-L
R-AUDIO-L
VIDEO
VIDEO
S-VIDEO OUT
RF
CHANNEL
3 4
IN
FROM ANT.
VHF/UHF
TO TV
OUT
2
NOTE:
Composite jacks offer only analog
480i (SDTV) resolution.
1
AUDIO
OUTPUT
VIDEO 1
S-VIDEO
S-Video
Jack
COMPO 2 COMPO 3
Y
Pb
Y
Pb
RESET
What you will need
for connections:
V Pr Pr
SERVICE
Audio / Video Cable – 1
L
L
L
L
S-Video Cable – 1
TV AV Input
Jacks
R
(MONO)
AUDIO
R
R
R
12