Sanyo-DP42545 (English) - Specs and reviews at HDTV Review

HELPFUL HINTS (PROBLEMS/SOLUTIONS)
Because of the Quality we build into our product,
very few problems are actual TV defects. Most problems
only involve simple hookup or setup changes that
can be solved by the customer. Please check the chart
Problem: Check these Conditions: Try these Solutions: Page No.
TV turns off
automatically
No picture, sound
(Digital Picture)
●
●
Check signal (Cable/Ant.) connection
Power surge protection feature
● Check antenna/external connections
● May be station trouble, NO signal broadcast
● MUTE function may be on.
● The Plasma TV takes a few seconds to
display an image.
No Captioning ● Check if station is broadcasting a
Closed-Caption signal.
● Select another channel.
Cannot customize
Caption
Cannot display
picture on a full
screen
Poor Picture/Sound
(watching Analog)
“No Signal” message
appears on screen
Pixilation of Digital
image
No TV Stereo or
SAP sound
Cannot select or scan
some channels
No Cable channels
above number 13
Remote Control
will not work TV
●
Digital Caption signal is not being
broadcast.
●
●
●
●
●
●
●
●
●
Press POWER key.
The sleep timer may have been set.
Unplug TV momentarily.
Adjust antenna.
Try a different channel.
Press RESET key to restart channel
search.
Adjust Volume.
7, 15
7, 15
Press CAPTION key to select captioning
mode. 21
Press CAPTION key to select Analog
captioning.
15, 21
● Pillar Box (4:3) signal being broadcast. ● Use the PIX SHAPE key to expand or
zoom the image. 15
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Check if program is in color.
Check antenna/external connections.
Color or Tint misadjusted.
May be station trouble.
May be MUTE function is on.
Check Audio/Video connections.
Check external equipment connections.
Check external equipment setting.
Check antenna connection.
Press INFO key and check signal
strength.
Check if station is broadcasting a true
MTS stereo signal or a SAP signal.
Channel may be removed from
memory.
Check antenna connections.
No digital signal being broadcast
V-Guide is set to block programming.
Weak Signal
Cable Channel Indicator C should
appear next to channel number.
Check batteries.
Check if TV is plugged in.
Poor Color ● Check if program is in color.
● Color or Time misadjusted.
Afterimages (ghosts)
appear
Cabinet makes
popping sound
●
●
Do not display the same image on
screen for a long period of time. Afterimages
or ghosts may appear on parts
of the panel.
This is a normal condition during
warm-up and cool down of the plastic
cabinet parts.
below and try the solutions listed for your problem. If
the problem still persists, before returning your TV,
please visit our website at www.sanyotv.com or call us
toll free at 1.800.877.5032. We Can Help!
●
●
●
●
●
●
●
●
Try a different channel.
Adjust antenna.
Press RESET key to restart channel
search.
Adjust Volume.
Press INPUT key.
Switch on external equipment.
Turn antenna, install signal booster.
Set external equipment output connections
to match input connections.
Turn antenna, install signal booster.
12, 13,
15, 27
11 ~ 14
●
● Install outdoor Digital antenna.
7, 14
●
●
●
●
●
●
●
●
●
●
Press AUDIO key.
Select CH. SCAN MEMORY and manually
add channels or start CH. (channel) search.
Set V-Guide to ALLOW ALL or press
RESET key to clear all settings and restart
channel search.
Turn antenna, install signal booster.
Switch Antenna Selection to Cable.
Replace batteries.
Aim remote control at front of TV.
15
15,
17 ~ 19
22 ~ 23
18
8,
14 ~ 15
Select Sports, Movie, or News to match
the program you are watching in the
menu system.
Use the Screen Saver function.
Use the White Screen Feature to repair
the panel.
26
27 ~ 28
29