Sanyo-DP42545 (English) - Specs and reviews at HDTV Review
Sanyo-DP42545 (English) - Specs and reviews at HDTV Review
Sanyo-DP42545 (English) - Specs and reviews at HDTV Review
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USING THE REMOTE CONTROL<br />
PRECAUTIONS<br />
To ensure safe oper<strong>at</strong>ion, please observe the following<br />
precautions:<br />
Use (2) AAA alkaline b<strong>at</strong>teries, see page 8.<br />
Replace both b<strong>at</strong>teries <strong>at</strong> the same time. Do not use a<br />
new b<strong>at</strong>tery with a used b<strong>at</strong>tery.<br />
Risk of explosion, if b<strong>at</strong>tery is replaced by an incorrect<br />
type.<br />
If b<strong>at</strong>teries have leaked in the Remote Control Unit,<br />
carefully wipe the case clean <strong>and</strong> load new b<strong>at</strong>teries.<br />
Do not expose the Remote Control Unit to moisture,<br />
or he<strong>at</strong>.<br />
REMOTE CONTROL KEYS<br />
➀Input Key—Press to change the input signal<br />
source as follows: Analog RF ➡ Digital RF ➡ Video1<br />
➡ Component2 ➡ Component3 ➡ Analog RF.<br />
➁Number Keys—Two keys must be pressed to select<br />
a channel. Example: Press 0 then 6 to select channel<br />
6. For Analog cable channels above 100, press <strong>and</strong><br />
hold the 1 key until C1– – appears.<br />
➂Info Key—Press to display Digital Full Banner or Analog<br />
Brief Banner inform<strong>at</strong>ion (press the INFO key again to<br />
remove the display).<br />
Digital Off-air Channel Full Banner—Contains a twopart<br />
Channel Number (Major <strong>and</strong> Minor). If available,<br />
the following is also included—St<strong>at</strong>ion ID, Program<br />
Title, D<strong>at</strong>e / Time (if set), Signal Strength, Video Resolution,<br />
V-Guide Program R<strong>at</strong>ing, <strong>and</strong> Audio Reception.<br />
Program<br />
Title<br />
Virtual Channel<br />
Major Minor<br />
St<strong>at</strong>ion ID<br />
Current<br />
Time/D<strong>at</strong>e<br />
Digital Cable Channel Full Banner—Contains a twopart<br />
Cable Channel Number (Major <strong>and</strong> Minor). If<br />
available the following is also included—D<strong>at</strong>e / Time (if<br />
set), Signal Strength, Video Resolution, V-Guide<br />
Program R<strong>at</strong>ing, <strong>and</strong> Audio Reception.<br />
Cable<br />
Indic<strong>at</strong>or<br />
“DC”<br />
Video Resolution<br />
05<br />
NBC<br />
10:26 pm<br />
Virtual Channel<br />
Major Minor<br />
Digital Cable Channel Full Banner<br />
Analog<br />
Antenna<br />
Signal Strength<br />
C 39<br />
FOX<br />
10:26 pm<br />
Analog<br />
Cable<br />
Analog Brief Banners<br />
V-Guide<br />
Program R<strong>at</strong>ing<br />
Current<br />
Time/D<strong>at</strong>e<br />
Video 1<br />
10:26 pm<br />
Audio<br />
Reception<br />
Video 1<br />
Input<br />
➃Recall Key—Select the first channel you want to<br />
w<strong>at</strong>ch; then select another channel using the<br />
NUMBER keys. Press RECALL to easily switch<br />
between the channels.<br />
NOTE:The RECALL key can not toggle between a Digital<br />
<strong>and</strong> Analog channel. See TUNER key description.<br />
Video Resolution<br />
Signal Strength<br />
V-Guide<br />
Program R<strong>at</strong>ing<br />
Digital Off-air Channel Full Banner<br />
Audio<br />
Reception<br />
➄Menu key—Press this key to display the on-screen<br />
setup menu.<br />
➅Tuner Key—Use this key to toggle from one tuning<br />
system to another, digital channels <strong>and</strong> analog channels.<br />
NOTE: The TUNER key is inactive when an external input is<br />
selected (Video1, Compo 2, or Compo 3).<br />
14
Change language