fiber products
fiber products
fiber products
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Index<br />
Glossary<br />
Work Area<br />
Shielded<br />
Products<br />
Modular<br />
Patching<br />
Tools<br />
and<br />
Testers<br />
S110<br />
Products<br />
Racks and<br />
Cable<br />
Management<br />
Fiber<br />
Products<br />
S110 ® MODULAR<br />
JACK BLOCKS<br />
6- AND 12- PORT PANELS MAY<br />
BE DETACHED FROM STAND-OFF<br />
LEGS BEFORE, DURING OR AFTER<br />
INSTALLATION<br />
S110 ® JACK BLOCKS ARE<br />
AVAILABLE IN 6-, 12-, 24-,<br />
AND 36-PORT CONFIGURATIONS<br />
CABLES ENTERING THROUGH ACCESS OPENINGS<br />
IN BASES ARE HIDDEN BY DESIGNATION LABELS<br />
TO PROVIDE A CLEAN APPEARANCE<br />
Patch Cords,<br />
Plugs and<br />
Cable<br />
S210<br />
Products<br />
ECONOMICAL<br />
Cost effective modular patching<br />
solution for small to medium size<br />
LANs.<br />
S66<br />
Products<br />
S110 ® 4-PAIR CONNECTING<br />
BLOCKS HAVE COLOR-CODED<br />
PAIRS ON EACH BLOCK<br />
MODULAR JACKS ARE IEC 603.7<br />
COMPLIANT AND HAVE 50<br />
MICROINCHES MINIMUM HARD<br />
GOLD PLATING OVER NICKEL<br />
Protection<br />
EASY PORT ACCESS<br />
Modular outlets and S110 ®<br />
terminations are located on front<br />
of panels for easy access.<br />
HORIZONTAL CABLING MAY BE ROUTED<br />
TO S110 ® TERMINATIONS IN THE<br />
CHANNEL BETWEEN ROWS OF OUTLETS<br />
Standards<br />
Overview<br />
Application<br />
Guide<br />
Installation<br />
Practices<br />
TOWER ® OPTION<br />
Also available mounted to S110 ®<br />
Tower ® which includes cable<br />
managers and covers to route and<br />
protect horizontal cables for a<br />
clean appearance (see page 8.5).<br />
S110 ® MODULAR JACK BLOCKS HIGHLIGHTS<br />
The S110 ® modular jack block provides a pre-wired distribution solution for<br />
network applications. The modular jack block can be wall mounted and is<br />
typically used to connect horizontal cabling to network equipment.<br />
Connections are made by terminating 4-pair horizontal cables to S110D<br />
connecting blocks and by patching to active equipment.<br />
MC5 PATCH CORDS PAGE 6.4 – 6.5<br />
8•14<br />
T H E S I E M O N . C O M P A N Y