fiber products

Work Area
Fiber
Products
Shielded
Products
Modular
Patching
Racks and
Cable
Management
Patch Cords,
Plugs and
Cable
S210
Products
S110
Products
S66
Products
SPLICE TRAYS
These aluminum trays can be ordered with either fusion, mechanical or fusion with sleeve splice holders and
come with a clear, snap-on polycarbonate cover. The standard tray holds up to 24 splices. For tight areas, a minitray
is available which accommodates up to 12 splices. Trays can be stacked for high-density applications.
STANDARD TRAY DIMENSIONS:
height: 103mm (4.07 in.);
width: 298mm (11.75 in.);
depth: 8.13mm (0.32 in.)
MINI TRAY DIMENSIONS:
height: 103mm (4.07 in.);
width: 179mm (7.06 in.);
depth: 8.13mm (0.32 in.)
PART #
DESCRIPTION
TRAY-(X) . . . . . . . . . . . . . . . . . . Standard fiber splice tray for up to 24 splices
TRAY-M-(X). . . . . . . . . . . . . . . . Mini fiber splice tray for up to 12 splices
TRAY-R-4 . . . . . . . . . . . . . . . . . Splice tray for ribbon fiber (up to 144 fibers)
Use (X) to specify type of splice holder: 1 = fusion, 2 = mechanical, 3 = fusion with sleeve
Notes: Mechanical splice holders are compatible with GTE elastomeric, Siecor Camsplice ® , Norland splice and Lucent CSL.
Fusion with sleeve splice holders can accommodate sleeve diameters from 1.5mm (0.059 in.) to 2mm (0.079 in.).
Standard Fusion splice holders are designed for 900 micron buffered fibers or 250 micron coated fibers.
COMPRESSION FITTINGS
Compression fittings are utilized as an alternate method for securing cables to FCP3 fiber
enclosures. Compression fittings resist water pressure up to 70psi. Acme threads on the
body prevent skipping, allowing for faster installations of lock-nuts. Polymer material
resists salt water, weak acids, gasoline, alcohol, oil, greases and common solvents.
PART #
DESCRIPTION
CF-(XX) . . . . . . . . . . . . . . . . . . . Compression fitting
Use (XX) to specify size: 40 = Used for 24-fiber cable; 51 = Used for 36-fiber cable;
60 = Used for 72-fiber cable; 70 = Used for 96-fiber cable
Protection
Tools
and
Testers
Standards
Overview
Application
Guide
Installation
Practices
Glossary
Index
COMPRESSION FITTING CONVERSION KITS
Conversion kits provide a means of securing fiber in Siemon rack and wall mount enclosures.
These fittings are liquid tight up to 70 psi water pressure and resist salt water, weak acids,
gasoline, alcohol, oil, grease and common solvents.
PART #
DESCRIPTION
CF-(XX)-(X)P-(XX). . . . . . . . . . . . Compression fitting conversion kit
Use first (XX) to specify cable accommodation size:
40 = 24-fiber distribution cable, 51 = 36-fiber distribution cable, 60 = 72-fiber distribution cable (for RIC72
enclosures only)
Note: For 96-fiber distribution cable, use Siemon p/n CF-70 compression fitting and mount directly to RIC or
SWIC3 enclosures.
Use (X) to specify enclosure type: R = kit for RIC rack mount enclosures, S = kit for SWIC3 and SWIC3G wall
mount enclosures.
Use 2nd (XX) to specify color: 01 = black, 02 = white.
BEND RADIUS GUIDE
For use in Siemon fiber enclosures, the Bend Radius Guide (BRG2) maintains optimal
fiber bend radius. No tools are required for installation. The BRG2 locks into the bottom
of Siemon enclosures via a quarter-turn post on the base. The BRG2 is divided into two
sections for independent management of multiple fibers. It can also be stacked using
quarter-turn post to provide additional management options.
PART #
DESCRIPTION
BRG2-02. . . . . . . . . . . . . . . . . . Bend radius guide, white
CF-(XX)-SP-01
CF-(XX)-RP-01
RACK MOUNT INTERCONNECT CENTER PAGES 1.6 – 1.7, WALL MOUNT INTERCONNECT CENTER PAGES 1.8 – 1.9
SWIC3 with conversion kit
RIC24-F with conversion kit
1•13
T H E S I E M O N . C O M P A N Y