fiber products
fiber products
fiber products
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Work Area<br />
Fiber<br />
Products<br />
Shielded<br />
Products<br />
Modular<br />
Patching<br />
BRIDGING CLIPS<br />
These industry standard bridging clips are used to connect adjacent quick clips on S66 blocks. The clips<br />
are easy to remove (see page 11.8 for information on our handy PROBE-PIC) for isolating and testing<br />
incoming pairs from outgoing pairs and are reusable. Available in either tin-plated grade A copper alloy<br />
(voice and data) or stainless steel (voice only).<br />
TIN-PLATED COPPER ALLOY CLIPS:<br />
SA1-(XXXX). . . . . . . 2-position clip<br />
SA1B-50 . . . . . . . . . 3-position clip, 50 per polybag<br />
SA1C-50 . . . . . . . . . 4-position clip, 50 per polybag<br />
STAINLESS STEEL CLIPS:*<br />
SA1-SS-(XXXX) . . . . 2-position clip, stainless steel<br />
*Not recommended for use with data applications.<br />
Use (XXXX) to specify quantity; 25 = 25/bag, 50 = 50/bag, 100 = 100/bag, 1000 = 1000/bag<br />
Racks and<br />
Cable<br />
Management<br />
Patch Cords,<br />
Plugs and<br />
Cable<br />
S210<br />
Products<br />
COLORED BRIDGING CLIPS<br />
Designed to fit the 66M type connecting block, each of these plug-on adapters contain two standard SA-1<br />
bridging clips, so they actually bridge a complete pair when installed, not just a single wire. The plastic housings<br />
are color-coded and serve to protect the quick clip. Technicians can test lines with the clips in place by using our<br />
TPE in-line test probe.<br />
PART #<br />
DESCRIPTION<br />
SMBC-2-(X) . . . . . . . . . . . . . . . Bridging clip<br />
TPE. . . . . . . . . . . . . . . . . . . . . . Test Probe/Extractor<br />
Use (X) to specify color: 2 = white, 3 = red, 5 = yellow, 6 = blue, 7 = green, 8 = violet<br />
S110<br />
Products<br />
S66<br />
Products<br />
Protection<br />
LINE STATUS INDICATOR<br />
This dual-element diode indicator plugs directly onto S66 quick clips to provide bridging and a visual<br />
indication of the line status. It allows a technician to avoid interrupting an active line while<br />
performing tests at the cross-connect field. The indicator flashes red and green when a line is ringing,<br />
and it lights continuously red or green (depending on which direction the LED is facing) to signify<br />
that a line is in use.<br />
PART #<br />
DESCRIPTION<br />
STA-2 . . . . . . . . . . . . . . . . . . . . Line Status Indicator<br />
Tools<br />
and<br />
Testers<br />
Standards<br />
Overview<br />
Application<br />
Guide<br />
RED SPECIAL SERVICE MARKERS<br />
These red plastic markers slide over S66 quick clips and terminated wires and are ideal for marking<br />
special circuits on blocks.<br />
PART #<br />
DESCRIPTION<br />
S-857-916 . . . . . . . . . . . . . . . . 2-position red marker<br />
S-857-78 . . . . . . . . . . . . . . . . . 3-position red marker<br />
S-857-134 . . . . . . . . . . . . . . . . 6-position red marker<br />
Installation<br />
Practices<br />
Glossary<br />
Index<br />
CAPACITY EXPANDING ADAPTERS<br />
These adapters create additional capacity on S66 blocks by plugging directly onto the S66 quick clips — with or<br />
without wires punched down. The adapters come with either one or two additional quick clips. Use a high-profile<br />
lasting hinge cover to fit over the adapters (see previous page). The adapters are top and bottom stackable, but not<br />
side-by-side stackable. Not designed for use on category 5e S66M1-50 blocks.<br />
SA2 . . . . . . . . . . . . .<br />
Adapter with<br />
1 double quick clip<br />
SA2-1 . . . . . . . . . . .<br />
Adapter with<br />
2 single quick clips<br />
SA3. . . . . . . . . . . . .<br />
Adapter with<br />
1 single quick clip<br />
9•13<br />
T H E S I E M O N . C O M P A N Y