• RFX-8030 manual

11. LOUD Button – The LOUD (loudness) button enables the bass
response to be boosted at low listening levels.
12. IR Eye – The IR (infrared receiver) Eye accepts infrared encoded
data from the IR Remote Control. (IR Remote Control is available
separately.)
13. Sine Wave Button – The SINE WAVE (tuner) button switches the
source unit to Tuner (AM/FM) Mode.
14. 1-2-3-4-5-6 Buttons – The 1-2-3-4-5-6 (channel preset) buttons
select radio frequencies stored in presets #1 through #6 of the tuner.
15. SEL Button – The SEL (select) button toggles between Tuner Mode
and External Audio.
16. AUTO Button – The AUTO (auto store) button allows a new group
of tuner stations to be temporarily programmed in memory for
traveling purposes.
17. P.SCN Button – The P.SCN (preset scan) button will scan and play
each preset tuner frequency for approximately 5 seconds each.
18. Cassette Button – The CASSETTE button switches the receiver to
tape mode if a cassette has been previously loaded into the housing.
19. Eject Button – Pressing the EJECT button will eject the cassette and
re-initialize Tuner Mode.
20. SCAN Button – Pressing the SCAN button will cycle and play each
track of the current playing CD in the CD Changer for 10 seconds.
21. RPT Button – Pressing the RPT (repeat play) button when in
Cassette/CD Changer mode will replay the current track.
22. RDM Button – Pressing the RDM (random play) button will
randomly select and play tracks from all discs in the CD Changer.
23. Pause Button – Pressing the Pause button will pause the current
playing tape/CD track and reduce the volume to minimum.
24. CDX Button – The CDX (stack of discs) button selects operation of
an optional CD Changer.
25. D.SCN Button – Pressing the D.SCN button (disc scan) will play the
first track of each CD in the CD Changer for 10 seconds, after which
the first CD will begin playing.
– 10 –