You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
®<br />
®<br />
+<br />
–<br />
1-6<br />
TUNER MODE<br />
FM 1<br />
FM 2<br />
FM 3<br />
AM<br />
Tuner Select<br />
1. Press the SINE WAVE (tuner) button to select the<br />
radio tuner and go to the last active band.<br />
2. Consecutive pressing of the SINE WAVE (tuner)<br />
button cycles the radio through FM1, FM2, FM3,<br />
and AM.<br />
=><br />
FM 1<br />
TUNE 100.3<br />
Display<br />
The display will indicate “TUNE”, station frequency<br />
and band indicator. After five seconds, the display will<br />
switch to its default (Tuner frequency or Clock) dependent<br />
on its program default.<br />
+<br />
–<br />
1-6<br />
TUNER PRESETS<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
1-6<br />
=><br />
FM 1 CH1<br />
TUNE 100.3<br />
Selecting Presets<br />
1. Press the 1-6 (channel preset) button to tune the<br />
radio to the frequency stored in preset #1.<br />
2. Consecutive pressing of the 1-6 (channel preset)<br />
button (within five seconds of the previous depression)<br />
will cycle through each tuner preset.<br />
Display<br />
Along with the preset which has been selected, the<br />
display will indicate “TUNE,” station frequency and<br />
band indicator. After five seconds, the display will<br />
revert to its default (Tuner or Clock).<br />
Considerations<br />
If the highest preset (#6) has been reached, the unit<br />
will wrap around to Preset #1.<br />
– 53 –
Change language