16CH Embedded Net DVR Standalone - Footprint Security
16CH Embedded Net DVR Standalone - Footprint Security
16CH Embedded Net DVR Standalone - Footprint Security
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Video Input BNC-jacks<br />
Mark 6 for Video Input 1-16 (Up to Bottom, left to right. .<br />
TV Monitor Output BNC-jack<br />
Mark 7: TV output BNC-jack to connect to TV monitor.<br />
Audio Input RCA-jack<br />
Mark 8 for 1~16 Audio Inputs (order according to numbers displayed, Up to<br />
Bottom, left to right))<br />
Audio Output RCA-jack<br />
Mark 9: Audio out jack for live audio monitoring, or audio output when playback<br />
saved files with audio.<br />
Ethernet RJ45-jack<br />
Mark 10: This is for RJ45 Internet connection socket. This is for 10Mbps/100Mbps<br />
Ethernet<br />
2.3 Hard Disk Installation:<br />
Please take extra notice that the system does not include a hard disk. So before<br />
you start operating this system, it is suggested you install a hard disk for recording<br />
files. The setting for the first hard disk is Master.<br />
Note1: This system is using Linux EXT3 hard disk format. It is suggested to use<br />
the un-partitioned and un-formatted hard disk, or use the already formatted<br />
to Linux EXT3 format hard disk.<br />
Note2:There is no restriction size for a single hard disk capacity. However, the<br />
maximum partition size will be 250GB.<br />
Note3:After a brand new hard disk is installed, this system will automatically partition<br />
and format this hard disk.<br />
When a hard disk is over 250GB, system will automatically separate it into 2 or more<br />
same partition sizes.<br />
<strong>16CH</strong> <strong>Embedded</strong> <strong>Net</strong> <strong>DVR</strong> <strong>Standalone</strong><br />
12