EMC32 / AMS32 V8.52 Release Note - Rohde & Schwarz
EMC32 / AMS32 V8.52 Release Note - Rohde & Schwarz
EMC32 / AMS32 V8.52 Release Note - Rohde & Schwarz
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OTA Section (<strong>AMS32</strong>)<br />
16.4 Other Extensions<br />
16.4.1 OTA Test Template Editor<br />
Communication Settings<br />
<br />
LTE-FDD: The dialog has been completely reworked in order to allow flexible configurations<br />
of the communication channel. This takes into account the availability of the<br />
User Defined Channels on the CMW500 with firmware 1.0.15.22 or higher and option<br />
CMW-KS510.<br />
o Connection Type can be selected to be RMC or User Defined Channel<br />
If User Defined Channel is selected, the following can additionally be set:<br />
o Number of resource blocks can now be freely defined in text fields.<br />
o Resource block start can now be configured.<br />
o Transport Block Size can now be configured.<br />
Loop Settings<br />
<br />
<br />
<br />
<br />
The maximum position for elevation is now the maximum configured in the driver s<br />
Properties dialog. Additionally, a hard coded maximum is applicable depending on the<br />
OTA system type: 360 degree for great-circle cut systems, 170 degree for conical cut<br />
systems.<br />
Minimum step size for elevation has been reduced to 3 degrees.<br />
Added new CDMA2000 band classes, which are supported throughout the whole<br />
system: JTACS (BC 3), IMT-2000 (BC 6), US PCS (BC 14).<br />
<strong>Rohde</strong> & <strong>Schwarz</strong> 23