EMC32 / AMS32 V8.52 Release Note - Rohde & Schwarz
EMC32 / AMS32 V8.52 Release Note - Rohde & Schwarz
EMC32 / AMS32 V8.52 Release Note - Rohde & Schwarz
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>EMC32</strong>-K1 Automotive / MIL<br />
6 <strong>EMC32</strong>-K1 Automotive / MIL<br />
6.1 Improvements<br />
●<br />
EMS Leveling: power limitation on reference calibration file<br />
now max power to nominal target level from immunity shape is interpolated<br />
o If for example the reference calibration has been done with 100mA and a limit shape<br />
starting with 30mA up to 100mA applies, then in such cases <strong>EMC32</strong> now interpolates the<br />
appropriate reduced forward power for each test frequency.<br />
7 <strong>EMC32</strong>-K2 Wireless Section<br />
7.1 Extensions<br />
●<br />
New extension <strong>EMC32</strong>-K26 for LTE Terminals<br />
o The new extension allows spurious emission and audio breakthrough measurements on<br />
LTE Terminals using a R&S CMW500 with the appropriate signaling option.<br />
8 <strong>EMC32</strong>-K3 RVC Method<br />
8.1 Extensions<br />
●<br />
RVC for MILSTD 461 F: only one sensor position is used during the calibration<br />
o The reverberation chamber calibration procedure supports now the calibration for one<br />
sensor position only. In this case the statistics evaluations of several sensor positions are<br />
disabled.<br />
8.2 Improvements<br />
●<br />
Antenna Cable correction for receiving antenna measurement path<br />
o The cable correction defined in the Antenna properties dialog of the receiving antenna is<br />
now applied for the calculation of the receiving antenna level.<br />
9 <strong>EMC32</strong>-K26 LTE extension for <strong>EMC32</strong>-K2<br />
9.1 Extensions<br />
●<br />
New Extension for spurious emission and audio breakthrough measurements on LTE<br />
Terminals<br />
o LTE Signaling SISO on CMW500<br />
<strong>Rohde</strong> & <strong>Schwarz</strong> 8
Change language