Ancho Manual V69_1 Full Page for PDF.pub - QRS Music Technology

For Technical Support Call 1-800-247-6557
Update Ancho’s Application Image
Ancho V69_1
The current Application Image, or operating system, version displays each time Ancho is turned on.
See “Ancho’s Power ON Sequence” at the beginning of this manual.
Download the new image file from the QRS Music website and copy to a CompactFlash card or CDROM disc.
http://www.qrsmusic.com/support_pa.asp
Press the STOP button to halt play.
Insert the CDROM disc or CompactFlash card containing the demo.ima file into Ancho.
The instructions below show how to update the demo image using a CDROM disc.
If a CFLASH card is used, replace CD-ROM with C-FLASH in the following instructions.
0 2 4 m I N 0 0 0 0 V 0 2 0
Rotate the SELect Dial so that “SETUP” displays in the screen.
0 2 4 m I N S E T U P V 0 2 0
Press the SELect button the enter the Setup Menu.
M A I N - V O L 0 2 0
Press the SELect button again so that the arrow begins flashing.
M A I N - V O L 0 2 0
Rotate the ADJust dial so that the arrow points to CD-ROM.
C D - R O M U p - D m o E x
Press the SELect button to stop the arrow from flashing.
C D - R O M U p - D m o E x
Rotate the ADJust dial to point the arrow toward the current CD-ROM setting.
C D - R O M U p - D m o E x
Press the SELect button so that the arrow begins to flash.
Rotate the ADJust dial to display “Up-App”.
C D - R O M U p - D m o E x
C D - R O M U p - A p p E x
Press the SELect button to stop the arrow from flashing.
C D - R O M U p - A p p E x
Rotate the ADJust dial to point the arrow toward Ex.
C D - R O M U p - A p p E x
Press the SELect button to execute the command and again when “Scc” displays.
Press the SELect button twice, quickly within one-half second, to save the new setting and exit.
Q R S M U S I C T E C H N O L O G I E S PAGE 49