9 - BMW Motorrad Danmark

9
124
z Maintenance
Rear-wheel stand
Installing auxiliary stand
at rear wheel
Use basic stand with tool number
(0 402 241) and adapters
(2 152 839).
Install adapter pins
(2 152 841) 1 in the rear wheel
swinging arm on left and right
and tighten to the specified
torque.
Service adapter to
swinging arm
19 Nm
Turn brackets 2 long ends out.
Adjust adapters 3 to the width
of the pins inserted in the rear
wheel swinging arm.
Set the height of the auxiliary
stand to raise the rear wheel
slightly clear of the ground.