9 - BMW Motorrad Danmark
9 - BMW Motorrad Danmark
9 - BMW Motorrad Danmark
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Press and hold down button 1<br />
until DTC warning light 3<br />
changes status.<br />
DTC warning light starts to<br />
show.<br />
Release button 1 within two<br />
seconds.<br />
DTC warning light remains<br />
ON.<br />
The DTC function is deactivated.<br />
Activating DTC function<br />
Press and hold down button 1<br />
until DTC warning light 3<br />
changes status.<br />
DTC warning light goes<br />
out; if self-diagnosis has not<br />
completed it starts flashing.<br />
Release button 1 within two<br />
seconds.<br />
DTC warning light remains<br />
off or continues to flash.<br />
The DTC function is activated.<br />
If the coding plug for the<br />
SLICK function is not inserted,<br />
switching the ignition off and<br />
then on again will have the<br />
same effect.<br />
A DTC fault has occurred<br />
if the DTC warning light<br />
shows when the motorcycle<br />
accelerates to a speed in excess<br />
of 10 km/h after the ignition<br />
was switched off and then<br />
on again.<br />
Ride mode<br />
Setting riding mode<br />
Switch on the ignition.<br />
If you want to change the ride<br />
mode while on the move: note<br />
the preconditions for changing<br />
mode described below.<br />
See the section entitled<br />
"Engineering details"<br />
for more information on the<br />
various ride modes that can be<br />
selected.<br />
4 43<br />
z Operation