9 - BMW Motorrad Danmark

4 42
z Operation
with BMW Motorrad Race ABS
and DTC OE
Press and hold down button 1
until first DTC warning light 3
and then ABS warning light 2
change their status.
The DTC setting remains unchanged.
ABS warning light shows.
Release button 1 within two
seconds.
ABS warning light remains
ON.
The ABS function is deactivated.
Activating ABS function
Press and hold down button 1
until ABS warning light 2
changes status.
ABS warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
The ABS warning light remains
off or continues to
flash.
The ABS function is activated.
If the coding plug for the
SLICK function is not inserted,
switching the ignition off and
then on again will have the
same effect.
If you switch the ignition off
then on again and the ABS
light comes back on, there is a
fault in the ABS.
Dynamic Traction
Control DTC
with BMW Motorrad Race ABS
and DTC OE
Deactivating DTC function
Switch on the ignition.
You have the option of deactivating
the DTC function
while the motorcycle is on the
move.