9 - BMW Motorrad Danmark

9
130
z Maintenance
Turn bulb 2 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radiation
from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Turn bulb 2 clockwise to install
it in the bulb housing.
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
Install screw 1.