2012 Buick LaCrosse Navigation System

Example of a dialogue
User: “Call.”
Voice output: “Please, say the name
tag to call.”
(for name tag information, see
“Saving a Name Tag” later in
this section)
User:”Name tag.“
Voice output: “Seven three one.”
User: “Yes.”
Voice output: “Calling.”
Starting a Second Call
Press the button b / g to start a
second call during an active
telephone call.
Available commands:
. “Send”: activate manual DTMF
(touch-tone dialling), e.g. for
voice mail or telephone banking.
. “Send name tag”: activate DTMF
(touch-tone dialling) by entering
a name tag.
. “Dial”
. “Call”
.
“Re-dialing”
. “Help”
. “Cancel”
Example of a dialogue
User: Press the b / g button if a
telephone call is active.
User: “Send.”
Voice output: “Please, say the
number to send.”
(for number input information, see
the dialogue example for “Making a
Call Using a Telephone Number”
earlier in this section)
User: “Send.”
Re-dialing
The “Re-dialing” command re-dials
the last number dialed.
Infotainment System 125
Saving a Name Tag
The “Save” command is used to
store a telephone number in the
telephone book under as a
name tag.
The name entered must be
repeated once. The pitch and
pronunciation must be as identical
as possible for both name inputs,
otherwise the voice control will
reject the inputs.
A maximum of 50 name tags can be
stored in the telephone book.
Name tags are speaker-dependent,
i.e. only the person who recorded a
name tag can open it. To avoid the
start of the recording of a saved
name from being cut off, a short
pause should be left after an
input request.
To be able to use the name tag
independently of the location, i.e.
including other countries, all
telephone numbers should be
entered with a “plus” character and
a country code.