Service Source Power Mac G5 - Retrocomputing.net
Service Source Power Mac G5 - Retrocomputing.net
Service Source Power Mac G5 - Retrocomputing.net
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Procedure<br />
1. Remove the two screws that secure the PCI card guide.<br />
2. Disconnect the six cables from the top of the logic board.<br />
3. Using a hex wrench, remove the four standoffs for the upper processor. Using a<br />
Phillips screwdriver, remove the remaining processor standoff (marked by a square in<br />
the illustration below). Repeat the procedure for a second processor, if installed.<br />
4. Remove the five screws that secure the logic board.<br />
Logic Board<br />
<strong>Power</strong> <strong>Mac</strong> <strong>G5</strong> Take Apart - 61