Service Source Power Mac G5 - Retrocomputing.net
Service Source Power Mac G5 - Retrocomputing.net
Service Source Power Mac G5 - Retrocomputing.net
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8. Disconnect the front inlet fan cable from the logic board.<br />
9. Remove the three PCI divider mounting screws and remove the divider (with PCI card<br />
guide and thermistor attached) from the logic board.<br />
10. Position the PCI divider on the replacement logic board and install the three mounting<br />
screws.<br />
11. Connect the thermistor and front inlet fan cable to the logic board.<br />
Logic Board<br />
<strong>Power</strong> <strong>Mac</strong> <strong>G5</strong> Take Apart - 63