Service Source Power Mac G5 - Retrocomputing.net
Service Source Power Mac G5 - Retrocomputing.net
Service Source Power Mac G5 - Retrocomputing.net
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Peel the backing off the EMI shield gasket and apply the gasket to the bottom of<br />
the shield, making sure the openings in the gasket align with the shield openings.<br />
2. Thread the power button cable through the opening in the EMI shield and connect the<br />
cable to the front panel board.<br />
3. Insert the front panel board into the EMI shield, making sure the ports are fully seated<br />
in the openings in the shield.<br />
4. Install the front panel board and EMI shield on the inside front of the enclosure and<br />
replace the two mounting screws.<br />
5. Install the metal cap on the EMI shield.<br />
Front Panel Board<br />
<strong>Power</strong> <strong>Mac</strong> <strong>G5</strong> Take Apart - 79