Samsung ME40C User Manual - Touch Screens Inc.

Speaker Settings
MENUm → Sound → Speaker Settings → ENTERE
Sound
Sound Mode
Sound Effect
Speaker Settings
Reset Sound
Standard
--
The displayed image may differ depending on the model.
••
Speaker Select (External / Internal)
If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo
caused by the difference in decoding speed between the products speakers and the speakers attached to your audio
receiver. If this occurs, set the product to External.
――
When you set Speaker Select to External, the products speakers are turned off.
You will hear sound through the external speakers only. When the Speaker Select is set to Internal, both the product
speakers and the external speakers are on. You will hear sound through both.
――
If there is no video signal, both the products speakers and the external speakers will be mute.
••
Auto Volume (Off / Normal / Night)
The volume can vary depending on the channel.
Automatically equalize the volume level when switching to another channel.
--
Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the
same.
--
Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night,
when you may want to keep the volume low.
――
To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of
the connected source device may not be applied if Auto Volume is set to Normal or Night.
111