Samsung ME40C User Manual - Touch Screens Inc.

Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn Off
Receiver
On
Yes
Off
Auto Turn Off
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
••
No / Yes
――
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.
――
May not be enabled depending on the device.
Switching between Anynet+ Devices
--
The displayed image may differ depending on the model.
1 Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press E.
2 Select Device List, and then press the E button.
If you cannot find a device you want, select Refresh to refresh the list.
3 Select a device, and then press the E button. You can switch to the selected device.
――
The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.
――
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in
progress.
――
If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use
the Anynet+ function.
――
Make sure to switch to an Anynet+ device by using the Device List.
141