Samsung ME40C User Manual - Touch Screens Inc.
Samsung ME40C User Manual - Touch Screens Inc.
Samsung ME40C User Manual - Touch Screens Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Optimum Picture Quality and Afterimage Burn-in Prevention<br />
Optimum Picture Quality<br />
••<br />
To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may<br />
degrade if the optimum resolution is not selected.<br />
--<br />
Resolution: 1920 x 1080<br />
--<br />
Vertical frequency (refresh rate): 56 ~ 75 Hz<br />
Screen refresh rate: refers to the number of times a display image is refreshed per second.<br />
••<br />
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product<br />
performance.<br />
--<br />
The number of sub-pixels by panel type: 6,220,800<br />
••<br />
Run Auto Adjustment to improve the picture quality. If noise is still found even after auto adjustment, adjust Coarse or Fine.<br />
••<br />
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.<br />
--<br />
Activate power-saving mode or a dynamic screen saver if you will not be using the product for an extended period of time.<br />
••<br />
Unlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can be set to only one resolution to obtain the optimum picture quality. Therefore, setting a<br />
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for<br />
your monitor.<br />
248
Change language