Samsung ME40C User Manual - Touch Screens Inc.
Samsung ME40C User Manual - Touch Screens Inc.
Samsung ME40C User Manual - Touch Screens Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Network Status<br />
Wi-Fi Direct<br />
MENU m → Network → Network Status → ENTER E<br />
You can check the current network and Internet status.<br />
Network Status<br />
Your wireless network and Internet connection are setup and ready to use.<br />
MAC Address<br />
00 : 12 : fb : df : 29 : 76<br />
IP Address<br />
***. ***. ***. ***.<br />
Subnet Mask<br />
***. ***. ***. ***.<br />
Gateway<br />
***. ***. ***. ***.<br />
DNS Server<br />
***. ***. ***. ***.<br />
You are connected to the Internet. If you have any problems using online<br />
services, please contact your Internet service provider.<br />
IP Settings<br />
Retry<br />
Close<br />
――<br />
The displayed image may differ depending on the model.<br />
MENU m → Network → Wi-Fi Direct → ENTER E<br />
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless<br />
mobile devices with your product directly without a router.<br />
――<br />
To use this function, your mobile device should be supported by the Wi-Fi Direct.<br />
To connect your mobile device with your product using Wi-Fi Direct,<br />
follow these steps:<br />
1 Go to Wi-Fi Direct screen. The product starts to search devices.<br />
2 Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.<br />
••<br />
PBC (Push Button Configuration): Press the WPS(PBC) button on your Wi-Fi device within 2 minutes.<br />
Your product automatically acquires all the network setting values it needs and connects to your<br />
network.<br />
••<br />
PIN: Input the displayed PIN on your device.<br />
――<br />
If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnected.<br />
118
Change language